Heater Connections Check

We’ve narrowed it down to the possible mis-matching polarity between the top connections that are on the roof of the sauna and the interior corner connections.  You will need to remove the (large) dust cover on top with a phillips screwdriver and inspect the white connectors on each side.

See if it's loose or a cable is not connected.  We believe that during transit and the fact that we twist the cables that it may not be fully connected.  Please push the connections downwards from the top. 

Please make sure that the colors of the wires (black/green/white) match polarity from the outside (exterior) to the inside (interior). If the connections are not matching polarity, then please 180° the interior connections to match.

You can also check the heater cables connected to the power supply. Make sure they are connected securely.